Μετάβαση στο κύριο περιεχόμενο

Πώς να επαναφέρετε λείπει Εκτελέστε μια επιλογή σεναρίου στον κανόνα του Outlook;

Συγγραφέας: Kelly Τελευταία τροποποίηση: 2023-12-22

Σε ορισμένες εκδόσεις του Outlook, ιδιαίτερα σε πρόσφατες ενημερώσεις, η επιλογή "Εκτέλεση σεναρίου" ενδέχεται να είναι απενεργοποιημένη από προεπιλογή ως μέτρο ασφαλείας. Για να ενεργοποιήσετε την επιλογή "Εκτέλεση σεναρίου" στο Outlook, επιτρέποντας τη δημιουργία κανόνων με δέσμες ενεργειών VBA, συνήθως θα χρειαστεί να τροποποιήσετε συγκεκριμένες ρυθμίσεις μητρώου. Συνεχίστε να διαβάζετε για λεπτομερείς οδηγίες σχετικά με το πώς να το κάνετε αυτό.


Ενεργοποιήστε την επιλογή "Εκτέλεση σεναρίου" που λείπει στο Outlook

Για να επαναφέρετε τα χαμένα εκτελέστε ένα σενάριο επιλογή στον οδηγό κανόνων του Outlook, πρώτα βεβαιωθείτε ότι το Outlook είναι κλειστόκαι, στη συνέχεια, προχωρήστε με τα ακόλουθα βήματα:

  1. Πατήστε το κουμπί Win + R κλειδιά για να ανοίξετε το τρέξιμο κουτί διαλόγου. Σε αυτό το παράθυρο διαλόγου, πληκτρολογήστε regedit και, στη συνέχεια, κάντε κλικ στο OK κουμπί.
  2. Στο ξεσπώντας Έλεγχος λογαριασμού χρήστη πλαίσιο διαλόγου, κάντε κλικ στο Ναι κουμπί.
  3. Στο Registry Editor παράθυρο, μεταβείτε στην παρακάτω διαδρομή για πρόσβαση στο Ασφάλεια σύνθεση: HKEY_CURRENT_USER \ Λογισμικό \ Microsoft \ Office \ 16.0 \ Outlook \ Security
  4. Κάντε δεξί κλικ στο Ασφάλεια και επιλέξτε Νέα > DWORD (32-bit).
  5. Ονομάστε το DWORD που δημιουργήθηκε ως EnableUnsafeClientMailRules.
  6. Κάντε διπλό κλικ στο EnableUnsafeClientMailRules DWORD για να ανοίξετε το Επεξεργασία τιμής DWORD (32-bit) κουτί διαλόγου. Τύπος 1 στο Αξία για και κάντε κλικ στο κουμπί OK.
  7. Κάντε επανεκκίνηση του Microsoft Outlook.

Ακολουθώντας τα βήματα που περιγράφονται παραπάνω, θα μπορείτε να εντοπίσετε και να χρησιμοποιήσετε την επιλογή "εκτέλεση σεναρίου" κατά τη δημιουργία κανόνων στο Outlook.


Σχετικά άρθρα


Τα καλύτερα εργαλεία παραγωγικότητας γραφείου

Kutools για το Outlook - Πάνω από 100 ισχυρές δυνατότητες για υπερφόρτιση του Outlook σας

🤖 Βοηθός αλληλογραφίας AI: Άμεσα επαγγελματικά email με μαγεία AI -- με ένα κλικ για ιδιοφυείς απαντήσεις, τέλειος τόνος, πολυγλωσσική γνώση. Μεταμορφώστε τα email χωρίς κόπο! ...

📧 Αυτοματοποίηση ηλεκτρονικού ταχυδρομείου: Εκτός γραφείου (Διαθέσιμο για POP και IMAP)  /  Προγραμματισμός αποστολής email  /  Αυτόματο CC/BCC βάσει κανόνων κατά την αποστολή email  /  Αυτόματη προώθηση (Σύνθετοι κανόνες)   /  Αυτόματη προσθήκη χαιρετισμού   /  Διαχωρίστε αυτόματα τα μηνύματα ηλεκτρονικού ταχυδρομείου πολλών παραληπτών σε μεμονωμένα μηνύματα ...

📨 Διαχείριση e-mail: Εύκολη ανάκληση email  /  Αποκλεισμός απάτης email από υποκείμενα και άλλους  /  Διαγραφή διπλότυπων μηνυμάτων ηλεκτρονικού ταχυδρομείου  /  Προχωρημένη Αναζήτηση  /  Ενοποίηση φακέλων ...

📁 Συνημμένα ProΜαζική αποθήκευση  /  Αποσύνδεση παρτίδας  /  Συμπίεση παρτίδας  /  Αυτόματη αποθήκευση   /  Αυτόματη απόσπαση  /  Αυτόματη συμπίεση ...

🌟 Διασύνδεση Magic: 😊Περισσότερα όμορφα και δροσερά emojis   /  Ενισχύστε την παραγωγικότητά σας στο Outlook με προβολές με καρτέλες  /  Ελαχιστοποιήστε το Outlook αντί να κλείσετε ...

???? Με ένα κλικ Wonders: Απάντηση σε όλους με εισερχόμενα συνημμένα  /   Email κατά του phishing  /  🕘Εμφάνιση ζώνης ώρας αποστολέα ...

👩🏼‍🤝‍👩🏻 Επαφές & Ημερολόγιο: Μαζική προσθήκη επαφών από επιλεγμένα μηνύματα ηλεκτρονικού ταχυδρομείου  /  Διαχωρίστε μια ομάδα επαφής σε μεμονωμένες ομάδες  /  Κατάργηση υπενθυμίσεων γενεθλίων ...

Διανεμήθηκαν παραπάνω από 100 Χαρακτηριστικά Περιμένετε την εξερεύνηση σας! Κάντε κλικ εδώ για να ανακαλύψετε περισσότερα.

 

 

Comments (26)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
You switched from 32 bit to 64 bit without explanation. See "New > DWORD (32-BIT Value)" then after "6. In the Edit QWORD (64-BIT)". Which is it ? Or is it both?
This comment was minimized by the moderator on the site
Sorry for the confusion. It should be the DWORD (32-bit) Value. And I've fixed it in the tutorial. 🙂
This comment was minimized by the moderator on the site
You change from DWORD to QWORD at the end.
It should be DWORD
This comment was minimized by the moderator on the site
Thank you for bringing this to my attention. I've made the necessary correction in the tutorial.
This comment was minimized by the moderator on the site
Great! Thanks
This comment was minimized by the moderator on the site
This worked for me in Outlook for Office 365. Once point to clarify, the instructions flip-flop between DWORD and QWORD, which are mutually exclusive. I used DWORD and it worked.
This comment was minimized by the moderator on the site
I also didn't have a security folder. To get around the issue, I set a rule to forward all emails fitting a specific rule to IFTTT so I can use their automation instead. Won't work for everybody, and attachments get a long number added to them if saving to Dropbox.
This comment was minimized by the moderator on the site
what applet did you use on IFTTT, or did you make your own?
This comment was minimized by the moderator on the site
I set an email trigger, and set the action to be to save to Dropbox. However, I've since switched to Microsoft Flow for saving Gmail directly to Dropbox. My specific goal was to save Gmail attachments to Dropbox, and Flow worked best for that after IFTTT dropped support for reading emails from Gmail.
This comment was minimized by the moderator on the site
I Don't Have a security folder after HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook
This comment was minimized by the moderator on the site
It's because Microsoft has yet again changed something concerning this feature. Most likely, this registry key path has completely changed, or has been outright omitted. I have a Premier Support ticket open with MS currently to have them provide us the CORRECT registry setting for Office2016/2019 current monthly channel to bring the Run a Script in Rules Actions back. It is completely unacceptable for MS to continue to alter/omit features like this without clear & priority notification to clients. I understand the security risks behind using such a feature, but in certain scenarios, this still is used.
This comment was minimized by the moderator on the site
By playing around I found the correct key:
Computer\HKEY_USERS\{whichevertheuserkeyis}\Software\Microsoft\Office\16.0\Outlook\Security

So do not use HKEY_Current_User, instead use HKEY_USERS
This comment was minimized by the moderator on the site
This doesn't seem to work for Outlook 2013. Is there a method that will work for this version? Also, your instructions reference DWORD and the images imply QWORD.
This comment was minimized by the moderator on the site
For 2013 I used HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Security and DWORD EnableUnsafeClientMailRules with value 1.
Each version of office has its own folder in "HKEY_CURRENT_USER\Software\Microsoft\Office\"

You also need to allow the macro to run in outlook 2013:

File -> Options -> Trust Centre -> Trust centre settings
-> Macro settings -> "Notifications for all macros"

This will ask you to allow the macro the first time the rule runs, but be careful not to allow any other unknown macros during day to day use. You could also use a digitally signed macro, and only allow digitally signed ones to run.

Then create your script, create a rule that runs it, and you should be set.
This comment was minimized by the moderator on the site
Did not work for me.  I have Outlook 2013, but maybe now that Office 365 has overstepped this setting somehow.  I have the trust settings enabled to notify for all Macros.
This comment was minimized by the moderator on the site
DWORD or QWORD? A bit confusing to understand which to use... Had to create DWORD to make it work. Thanks
This comment was minimized by the moderator on the site
Do You have instructions how to enable this option also for outlook 2010?
This comment was minimized by the moderator on the site
Thank You! It worked for me and as mentioned in one of the comments below, Step 6 was DWORD dialogue box for me.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations