Μετάβαση στο κύριο περιεχόμενο

Πώς να μετρήσετε τα συνολικά κλικ σε ένα καθορισμένο κελί στο Excel;

Αυτό το άρθρο αναφέρεται στη μέτρηση των συνολικών κλικ σε ένα καθορισμένο κελί στο Excel.

Μετρήστε τα συνολικά κλικ σε ένα καθορισμένο κελί με κωδικό VBA


Μετρήστε τα συνολικά κλικ σε ένα καθορισμένο κελί με κωδικό VBA

Κάντε τα εξής για να μετρήσετε τα συνολικά κλικ σε ένα καθορισμένο κελί στο Excel.

1. Στο φύλλο εργασίας περιέχει το κελί που πρέπει να μετρήσετε τα συνολικά του κλικ, κάντε δεξί κλικ στην καρτέλα φύλλου και, στη συνέχεια, κάντε κλικ στο Προβολή κωδικού από το μενού περιβάλλοντος.

2. Στο Microsoft Visual Basic για εφαρμογές παράθυρο, αντιγράψτε και επικολλήστε κάτω από τον κώδικα VBA στο παράθυρο Code.

Κωδικός VBA: Μετρήστε τα συνολικά κλικ σε ένα καθορισμένο κελί στο Excel

Public xRgS, xRgD As Range
Public xNum As Long
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    On Error Resume Next
    If Target.Cells.Count > 1 Then Exit Sub
    Set xRgS = Range("E2")
    If xRgS Is Nothing Then Exit Sub
    Set xRgD = Range("H2")
    If xRgD Is Nothing Then Exit Sub
    If Intersect(xRgS, Target) Is Nothing Then Exit Sub
    xNum = xNum + 1
    xRgD.Value = xNum
End Sub

Note: Στον κώδικα, το E2 είναι το κελί που πρέπει να μετρήσετε τα συνολικά του κλικ και το H2 είναι το κελί εξόδου της καταμέτρησης. Αλλάξτε τα όπως χρειάζεστε.

3. Πάτα το άλλος + Q πλήκτρα για να κλείσετε το Microsoft Visual Basic για εφαρμογές παράθυρο.

Από τώρα και στο εξής, όταν κάνετε κλικ στο κελί E2 σε αυτό το καθορισμένο φύλλο εργασίας, τα συνολικά κλικ θα συμπληρωθούν αυτόματα στο κελί H2 όπως φαίνεται στο παρακάτω στιγμιότυπο οθόνης. Για παράδειγμα, εάν κάνετε κλικ στο κελί E2 5 φορές, ο αριθμός 5 θα εμφανίζεται στο κελί H2.

Τα καλύτερα εργαλεία παραγωγικότητας γραφείου

🤖 Kutools AI Aide: Επανάσταση στην ανάλυση δεδομένων με βάση: Ευφυής Εκτέλεση   |  Δημιουργία κώδικα  |  Δημιουργία προσαρμοσμένων τύπων  |  Αναλύστε δεδομένα και δημιουργήστε γραφήματα  |  Επίκληση Λειτουργιών Kutools...
Δημοφιλή χαρακτηριστικά: Εύρεση, επισήμανση ή αναγνώριση διπλότυπων   |  Διαγραφή κενών γραμμών   |  Συνδυάστε στήλες ή κελιά χωρίς απώλεια δεδομένων   |   Γύρος χωρίς φόρμουλα ...
Σούπερ Αναζήτηση: VLookup πολλαπλών κριτηρίων    VLookup πολλαπλών τιμών  |   VLookup σε πολλά φύλλα   |   Ασαφής αναζήτηση ....
Σύνθετη αναπτυσσόμενη λίστα: Γρήγορη δημιουργία αναπτυσσόμενης λίστας   |  Εξαρτημένη αναπτυσσόμενη λίστα   |  Πολλαπλή αναπτυσσόμενη λίστα ....
Διαχειριστής στήλης: Προσθέστε έναν συγκεκριμένο αριθμό στηλών  |  Μετακίνηση στηλών  |  Εναλλαγή κατάστασης ορατότητας κρυφών στηλών  |  Συγκρίνετε εύρη και στήλες ...
Επιλεγμένα Χαρακτηριστικά: Εστίαση πλέγματος   |  Προβολή σχεδίου   |   Μεγάλη Formula Bar    Διαχείριση βιβλίου εργασίας & φύλλου   |  Βιβλιοθήκη πόρων (Αυτόματο κείμενο)   |  Επιλογή ημερομηνίας   |  Συνδυάστε φύλλα εργασίας   |  Κρυπτογράφηση/Αποκρυπτογράφηση κελιών    Αποστολή email ανά λίστα   |  Σούπερ φίλτρο   |   Ειδικό φίλτρο (φίλτρο με έντονη γραφή/πλάγια γραφή/διαγραφή...) ...
Κορυφαία 15 σύνολα εργαλείων12 Κείμενο Εργαλεία (Προσθήκη κειμένου, Κατάργηση χαρακτήρων, ...)   |   50 + Διάγραμμα Τύποι (Gantt διάγραμμα, ...)   |   40+ Πρακτικό ΜΑΘΗΜΑΤΙΚΟΙ τυποι (Υπολογίστε την ηλικία με βάση τα γενέθλια, ...)   |   19 Εισαγωγή Εργαλεία (Εισαγωγή κωδικού QR, Εισαγωγή εικόνας από το μονοπάτι, ...)   |   12 Μετατροπή Εργαλεία (Αριθμοί σε λέξεις, Μετατροπή Συναλλάγματος, ...)   |   7 Συγχώνευση & διαχωρισμός Εργαλεία (Σύνθετες σειρές συνδυασμού, Διαίρεση κελιών, ...)   |   ... κι αλλα

Αυξήστε τις δεξιότητές σας στο Excel με τα Kutools για Excel και απολαύστε την αποτελεσματικότητα όπως ποτέ πριν. Το Kutools για Excel προσφέρει πάνω από 300 προηγμένες δυνατότητες για την ενίσχυση της παραγωγικότητας και την εξοικονόμηση χρόνου.  Κάντε κλικ εδώ για να αποκτήσετε τη δυνατότητα που χρειάζεστε περισσότερο...

Περιγραφή


Το Office Tab φέρνει τη διεπαφή με καρτέλες στο Office και κάνει την εργασία σας πολύ πιο εύκολη

  • Ενεργοποίηση επεξεργασίας και ανάγνωσης καρτελών σε Word, Excel, PowerPoint, Publisher, Access, Visio και Project.
  • Ανοίξτε και δημιουργήστε πολλά έγγραφα σε νέες καρτέλες του ίδιου παραθύρου και όχι σε νέα παράθυρα.
  • Αυξάνει την παραγωγικότητά σας κατά 50% και μειώνει εκατοντάδες κλικ του ποντικιού για εσάς κάθε μέρα!
Comments (31)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Hi.
thanks for your amazing code.
as i use this, the counter get restarted every time i open the file,
is there any solution for this issue?
i need to see thclick counts in a larger time window

thanks in advance
This comment was minimized by the moderator on the site
Hi Mehrdad,
I am sorry to reply to you so late. The following code can help solve your problem. Every time you open the file, the counter will start counting from the last counted number.

Public xRgS, xRgD As Range
'Updated by Extendoffice 20230407
Public xNum As Long
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    On Error Resume Next
    If Target.Cells.Count > 1 Then Exit Sub
    Set xRgS = Range("E2")
    If xRgS Is Nothing Then Exit Sub
    Set xRgD = Range("H2")
    If xRgD Is Nothing Then Exit Sub
    If Intersect(xRgS, Target) Is Nothing Then Exit Sub
    xNum = xRgD.Value
    xNum = xNum + 1
    xRgD.Value = xNum
End Sub
This comment was minimized by the moderator on the site
Hola. Muchas gracias por los códigos.
Me gustaría saber cómo contar las veces que se hace clic sobre un enlace en una celda.
Muchas gracias.
This comment was minimized by the moderator on the site
Hi jose maria,
To count the clicks on a hyperlink, you can try the following VBA code.
Suppose hyperlinks are in column A and you want the number of clicks to be populated in the corresponding cell of column B (as shown in the screenshot below)
Please put the following code in the worksheet (code) window.

Private Sub Worksheet_FollowHyperlink(ByVal Target As Hyperlink)
'Updated by Extendoffice 20220805
    Dim Hyperlink As Range
    Set Hyperlink = Target.Range

    Hyperlink.Offset(0, 1) = Hyperlink.Offset(0, 1) + 1
End Sub

https://www.extendoffice.com/images/stories/comments/comment-picture-zxm/clicks_on_a_hyperlink.png
This comment was minimized by the moderator on the site
Bonjour ,
j'aimerai comment je pourrais le nombre de clics sur les cellules D10 à M10 et le retranscrire à la ligne R10 et le faire pour toutes les lignes suivante donc compter les clics sur les cellules D11 à M11 et le transcrire à la ligne R11 etc etc ?

Cordialement
This comment was minimized by the moderator on the site
Hi DUFOUR,
To count the number of clicks from D10 to M10 and output the total number of clicks in R10, you can apply the following VBA code to get it done.
Note: In the code, the range "D10:M30" means that the code only works from the row 10 to row 30, so please specify the rows you want to count.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'Updated by Extendoffice 20220609
    Dim xNum As Long
    Dim xRgCount, xRg As Range
    
    On Error Resume Next
    If Target.Cells.Count > 1 Then Exit Sub

    Set xRg = Range("D10:M30")
    If Intersect(xRg, Target) Is Nothing Then Exit Sub
    Set xRgCount = Range("R" & Target.Row)
    
    If IsNumeric(xRgCount.Value) Then
        xNum = xRgCount.Value + 1
    Else
        xNum = 1
    End If
    xRgCount.Value = xNum
End Sub
This comment was minimized by the moderator on the site
Is there a way to backtrack the number count? For exemple: I'd made 5 clicks, but I just wanted 3. So I change the number in the cell to 3, and when I click again, it continues from 3. OR have the ability to press another cell and decrease the count by 1 if that is easier.
This comment was minimized by the moderator on the site
Hi, thank you for these VBA codes, they almost work for my needs. I fear the fact I need to go past double digits means it will not work. I need to have C8 through to C110 and the corresponding tally count being L8 through to L110. Can you help? Many thanks in advance.
This comment was minimized by the moderator on the site
Hi Andy,The following VBA code can do you a favor. Please have a try.<div data-tag="code">Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim xRgS, xRgD As Range
Dim xStrRg As String
Dim xCStr, xVStr As String
Dim xItem As Integer
xCStr = "C8:C110" 'The range of cells you want to record the clicks of each cell
xVStr = "L8:L110" 'The range of cells to place the records in
Set xRgS = Range(xCStr)
Set xRgD = Range(xVStr)
If Not (Intersect(xRgS, Target) Is Nothing) Then
xItem = Target.Row - xRgS.Item(1).Row + 1
xRgD.Item(xItem).Value = xRgD.Item(xItem).Value + 1
End If
End Sub
This comment was minimized by the moderator on the site
Hi, I'm trying to find a way of counting the number of times 20 different cells are being clicked (each one should be counted separately). I came across your VBA code suggestion, tried to adjust it to my specific needs but it won't work. can you please advise how the code should be written? the cells that I would like to count and the cells that the values should appear in are: F12>AU12, F13>AU13, G12>AV12, G13>AV13, H10>AW10, H11>AW11, H12>AW12, H13>AW13, H14>AW14, H15>AW15, I10>AX10, I11>AX11, I12>AX12, I13>AX13, I14>AX14, I15>AX15, J12>AY12, J13>AY13, K12>AZ12, K13>AZ13).
This is the VBA code I've tried with no success:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim xRgArray As Variant
Dim xNum
Dim xStrR, xStrS, xStrD As String
Dim xRgS, xRgD As Range

Dim xFNum As Long
xRgArray = Array("F12,AU12", "F13,AU13", "G12,AV12", "G13,AV13", "H10,AW10", "H11,AW11", "H12,AW12", "H13,AW13", "H14,AW14", "H15,AW15", "I10,AX10", "I11,AX11", "I12,AX12", "I13,AX13", "I14,AX14", "I15,AX15", "J12,AY12", "J13,AY13", "K12,AZ12", "K13,AZ13")
On Error Resume Next
If Target.Cells.Count > 1 Then Exit Sub
For xFNum = LBound(xRgArray) To UBound(xRgArray)
xStrR = xRgArray(xFNum)
xStrS = ""
xStrS = Left(xStrR, 2)
xStrD = ""
xStrD = Right(xStrR, 2)
Set xRgS = Nothing
Set xRgS = Range(xStrS)
If TypeName(xRgS) <> "Nothing" Then
Set xRgD = Nothing
Set xRgD = Range(xStrD)
If TypeName(xRgD) <> "Nothing" Then
If TypeName(Intersect(xRgS, Target)) <> "Nothing" Then
xRgD.Value = xRgD.Value + 1
End If
End If
End If
Next
End Sub

Thank you in advance, for your help.
This comment was minimized by the moderator on the site
Hi,The below code can help. Please have a try. Thank you.<div data-tag="code">Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim xRgS, xRgD As Range
Dim xStrRg As String
Dim xFNum As Integer
Dim xArr1, xArr2
If Target.Cells.Count > 1 Then Exit Sub
xStrRg = "F12-AU12; F13-AU13; G12-AV12; G13-AV13; H10-AW10; H11-AW11; H12-AW12; H13-AW13; H14-AW14; H15-AW15; I10-AX10; I11-AX11; I12-AX12; I13-AX13; I14-AX14; I15-AX15; J12-AY12; J13-AY13; K12-AZ12; K13-AZ13"
On Error Resume Next
xArr1 = Split(xStrRg, ";")
For xFNum = 0 To UBound(xArr1)
xArr2 = Split(xArr1(xFNum), "-")
Set xRgS = Range(xArr2(0))
Set xRgD = Range(xArr2(1))
If Not (Intersect(xRgS, Target) Is Nothing) Then
xRgD.Value = xRgD.Value + 1
End If
Next
End Sub
This comment was minimized by the moderator on the site
Crystal, The Above code is great for the sheet I am working with, thank you. But I have a question about adding a time macro so that everyday (excluding weekends) the tally moves to the next row in the sheet for example:

Row 3 - 7/1/2021 "B1-B3; C1-C3; D1-D3"
Row 4 - 7/2/2021 "B1-B4; C1-C4; D1-D4"
Row 5 - 7/3/2021 "B1-B5; C1-C5; D1-D5"

If this is possible? thx, Ken
This comment was minimized by the moderator on the site
The Above corrected code is great for the sheet I am working with, thank you. But I have a question about adding a time macro so that everyday (excluding weekends) the tally moves to the next row in the sheet for example:
Row 3 - 7/1/2021 "B1-B3; C1-C3; D1-D3"Row 4 - 7/2/2021 "B1-B4; C1-C4; D1-D4"Row 5 - 7/3/2021 "B1-B5; C1-C5; D1-D5"
This comment was minimized by the moderator on the site
Como zerar a contagem? How to reset the score?
This comment was minimized by the moderator on the site
Hi,
If you want to reset the counter, please add the below VBA code at the end of the original code which has been provided above, and then run it.

Sub ClearCount()
xRgD.Value = ""
xNum = 0
End Sub
This comment was minimized by the moderator on the site
Can you provide a code that allows counting clicks from A2, B2 cells through A14, B14 cells. Thanks in advance.
This comment was minimized by the moderator on the site
Hi Barbara,
Do you mean counting the total clicks in range A2:B14? Or clicks for each cell in range A2:B14?
This comment was minimized by the moderator on the site
Hola
Hay alguna manera de programar el conteo de clicks de acuerdo a la fecha, es decir programar varias celdas para que cuenten con la fecha del día?
This comment was minimized by the moderator on the site
Hello, there is a way to back the counting for any number that I want? For exemple: I'd made 5 clicks, but i just wanted 3. So I change the number in the cell to 3, and when I click again, it continue from 3.
Thank for the code!
This comment was minimized by the moderator on the site
Hi,
Sorry can’t help you with this, welcome to post any question about Excel to our forum: https://www.extendoffice.com/forum.html. You will get more Excel supports from our professional or other Excel fans.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations