Μετάβαση στο κύριο περιεχόμενο

Πώς να εφαρμόσετε ξανά αυτόματα το αυτόματο φιλτράρισμα όταν αλλάζουν δεδομένα στο Excel;

Στο Excel, όταν εφαρμόζετε το Φίλτρα Λειτουργία για φιλτράρισμα δεδομένων, το αποτέλεσμα του φίλτρου δεν θα αλλάξει αυτόματα με τις αλλαγές των δεδομένων στα φιλτραρισμένα δεδομένα σας. Για παράδειγμα, όταν φιλτράρω όλα τα μήλα από τα δεδομένα, τώρα, αλλάζω ένα από τα φιλτραρισμένα δεδομένα σε BBBBBB, αλλά το αποτέλεσμα δεν θα αλλάξει καθώς και το ακόλουθο στιγμιότυπο οθόνης που εμφανίζεται. Σε αυτό το άρθρο, θα μιλήσω για τον τρόπο αυτόματης επαναφοράς αυτόματου φίλτρου όταν αλλάζουν δεδομένα στο Excel.

doc auot ανανέωση φίλτρου 1

Εφαρμόστε ξανά αυτόματα το αυτόματο φίλτρο όταν αλλάζουν δεδομένα με τον κώδικα VBA


βέλος μπλε δεξιά φούσκα Εφαρμόστε ξανά αυτόματα το αυτόματο φίλτρο όταν αλλάζουν δεδομένα με τον κώδικα VBA

Κανονικά, μπορείτε να ανανεώσετε τα δεδομένα φίλτρου κάνοντας κλικ στη δυνατότητα "Εφαρμογή ξανά" μη αυτόματα, αλλά, εδώ, θα εισαγάγω έναν κωδικό VBA για να ανανεώσετε αυτόματα τα δεδομένα φίλτρου όταν αλλάζουν τα δεδομένα, κάντε τα εξής:

1. Μεταβείτε στο φύλλο εργασίας που θέλετε να ανανεώσετε αυτόματα το φίλτρο όταν αλλάζουν τα δεδομένα.

2. Κάντε δεξί κλικ στην καρτέλα φύλλων και επιλέξτε Προβολή κωδικού από το μενού περιβάλλοντος, στο αναδυόμενο Microsoft Visual Basic για εφαρμογές παράθυρο, αντιγράψτε και επικολλήστε τον ακόλουθο κώδικα στο κενό παράθυρο της ενότητας, δείτε το στιγμιότυπο οθόνης:

Κωδικός VBA: Φιλτράρετε ξανά αυτόματα όταν αλλάζουν δεδομένα:

Private Sub Worksheet_Change(ByVal Target As Range)
   Sheets("Sheet3").AutoFilter.ApplyFilter
End Sub

doc auot ανανέωση φίλτρου 2

Note: Στον παραπάνω κώδικα, Φύλλο 3 είναι το όνομα του φύλλου με αυτόματο φίλτρο που χρησιμοποιείτε, αλλάξτε το ανάλογα με τις ανάγκες σας.

3. Και, στη συνέχεια, αποθηκεύστε και κλείστε αυτό το παράθυρο κώδικα, τώρα, όταν αλλάζετε τα φιλτραρισμένα δεδομένα, το Φίλτρα Η λειτουργία θα ανανεωθεί αυτόματα ταυτόχρονα, δείτε το στιγμιότυπο οθόνης:

doc auot ανανέωση φίλτρου 3

Τα καλύτερα εργαλεία παραγωγικότητας γραφείου

🤖 Kutools AI Aide: Επανάσταση στην ανάλυση δεδομένων με βάση: Ευφυής Εκτέλεση   |  Δημιουργία κώδικα  |  Δημιουργία προσαρμοσμένων τύπων  |  Αναλύστε δεδομένα και δημιουργήστε γραφήματα  |  Επίκληση Λειτουργιών Kutools...
Δημοφιλή χαρακτηριστικά: Εύρεση, επισήμανση ή αναγνώριση διπλότυπων   |  Διαγραφή κενών γραμμών   |  Συνδυάστε στήλες ή κελιά χωρίς απώλεια δεδομένων   |   Γύρος χωρίς φόρμουλα ...
Σούπερ Αναζήτηση: VLookup πολλαπλών κριτηρίων    VLookup πολλαπλών τιμών  |   VLookup σε πολλά φύλλα   |   Ασαφής αναζήτηση ....
Σύνθετη αναπτυσσόμενη λίστα: Γρήγορη δημιουργία αναπτυσσόμενης λίστας   |  Εξαρτημένη αναπτυσσόμενη λίστα   |  Πολλαπλή αναπτυσσόμενη λίστα ....
Διαχειριστής στήλης: Προσθέστε έναν συγκεκριμένο αριθμό στηλών  |  Μετακίνηση στηλών  |  Εναλλαγή κατάστασης ορατότητας κρυφών στηλών  |  Συγκρίνετε εύρη και στήλες ...
Επιλεγμένα Χαρακτηριστικά: Εστίαση πλέγματος   |  Προβολή σχεδίου   |   Μεγάλη Formula Bar    Διαχείριση βιβλίου εργασίας & φύλλου   |  Βιβλιοθήκη πόρων (Αυτόματο κείμενο)   |  Επιλογή ημερομηνίας   |  Συνδυάστε φύλλα εργασίας   |  Κρυπτογράφηση/Αποκρυπτογράφηση κελιών    Αποστολή email ανά λίστα   |  Σούπερ φίλτρο   |   Ειδικό φίλτρο (φίλτρο με έντονη γραφή/πλάγια γραφή/διαγραφή...) ...
Κορυφαία 15 σύνολα εργαλείων12 Κείμενο Εργαλεία (Προσθήκη κειμένου, Κατάργηση χαρακτήρων, ...)   |   50 + Διάγραμμα Τύποι (Gantt διάγραμμα, ...)   |   40+ Πρακτικό ΜΑΘΗΜΑΤΙΚΟΙ τυποι (Υπολογίστε την ηλικία με βάση τα γενέθλια, ...)   |   19 Εισαγωγή Εργαλεία (Εισαγωγή κωδικού QR, Εισαγωγή εικόνας από το μονοπάτι, ...)   |   12 Μετατροπή Εργαλεία (Αριθμοί σε λέξεις, Μετατροπή Συναλλάγματος, ...)   |   7 Συγχώνευση & διαχωρισμός Εργαλεία (Σύνθετες σειρές συνδυασμού, Διαίρεση κελιών, ...)   |   ... κι αλλα

Αυξήστε τις δεξιότητές σας στο Excel με τα Kutools για Excel και απολαύστε την αποτελεσματικότητα όπως ποτέ πριν. Το Kutools για Excel προσφέρει πάνω από 300 προηγμένες δυνατότητες για την ενίσχυση της παραγωγικότητας και την εξοικονόμηση χρόνου.  Κάντε κλικ εδώ για να αποκτήσετε τη δυνατότητα που χρειάζεστε περισσότερο...

Περιγραφή


Το Office Tab φέρνει τη διεπαφή με καρτέλες στο Office και κάνει την εργασία σας πολύ πιο εύκολη

  • Ενεργοποίηση επεξεργασίας και ανάγνωσης καρτελών σε Word, Excel, PowerPoint, Publisher, Access, Visio και Project.
  • Ανοίξτε και δημιουργήστε πολλά έγγραφα σε νέες καρτέλες του ίδιου παραθύρου και όχι σε νέα παράθυρα.
  • Αυξάνει την παραγωγικότητά σας κατά 50% και μειώνει εκατοντάδες κλικ του ποντικιού για εσάς κάθε μέρα!
Comments (40)
Rated 5 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
Finally got the filter to update automatically. My scenario included a filter on sheet "Master" that had a formulas that depended on other sheets (named 1, 2,...,21).

Paste this in the source code into the "Master" sheet.

Private Sub Worksheet_Calculate()
On Error Resume Next
Application.EnableEvents = False
Me.AutoFilter.ApplyFilter
Application.EnableEvents = True
End Sub


Paste this in the source code of each sheet that feeds data into the master sheet. (Sheet 21 shown from my scenario)

Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
Sheets("Master").AutoFilter.ApplyFilter
End Sub
This comment was minimized by the moderator on the site
Its not working if able changing by itslef, like when you linking data from another app, can someone help me fix this please
This comment was minimized by the moderator on the site
Pasted it as shown, but not working. The sheet I need updated is an invoice that has formulas that are pulling from another sheet. Since the blank cells all have formulas in them, is that preventing it from working? Seems simple for it to work, so I'm getting frustrated with myself.
This comment was minimized by the moderator on the site
2022 update!
Just add this to the sheets you want it applied too.

Private Sub Worksheet_Change(ByVal Target As Range)
AutoFilter.ApplyFilter
End Sub
Rated 5 out of 5
This comment was minimized by the moderator on the site
My input data is on the first sheet of the book, and the table in which the filter is applied is on another sheet of the same book. When I change the data on the first sheet, the filter on the second sheet should be updated. But if at the time of changing the data, a cell in the range of this table is not selected, then I get an error:"Run-time error '91': Object variable or With block variable not set". Therefore, i am should always check that the cursor is in a table range cell and not in any other place on the sheet. How to fix it?Solved:
Private Sub Worksheet_Change(ByVal Target As Range)
Sheets("name of sheet").ListObjects("name of table").AutoFilter.ApplyFilter
End Sub
This comment was minimized by the moderator on the site
Perfect!!! mine was in a table and this worked a treat!! Thank you!
This comment was minimized by the moderator on the site
Thank you. Works great!
This comment was minimized by the moderator on the site
Hey this works great but I'd like to re-apply the autofilter to multiple sheets if possible.
I have 3 sheets (Enquiry, Booked, No sale)

What I'm trying to do is essentially move the data when I change the item status code:
"Enquiry" is filtered to show 'In progress' only, "Booked" is filtered to show 'Booked' only etc

Is there a way to re-apply filter to multiple worksheets when making a change on "enquiry"
This comment was minimized by the moderator on the site
I actually have data from an other Excel file that got imported in a Excelsheet with the name "Database". Then I import this data in the same Excel file but in an other ExcelSheet "Overview". I want when the data changes in the orgininal source, that the filter applies in the sheet "Overview". Thank you in forward for the one who can help me :). P.S. cant use VBA in the firt excelsheet
This comment was minimized by the moderator on the site
Hi,

This is a great bit of code thank you. The only issue I am having is I'm using a drop down on a separate chart sheet. If I manually change the value in the cell associated with the drop down, it works. But when I try to just use the drop down, it won't update. Any thoughts?
This comment was minimized by the moderator on the site
Hi, thanks so much for the help. Something isn't working right for me. Here's the story.

Sheet1 has variable data. Sheet3 has static data and filter. Filter criteria on "Sheet3" comes from Sheet1. Sheet1 has data that comes from filtered results on Sheet3.

Sheet3 has code:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("A1:U14").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range("A22:U23"), CopyToRange:=Range("A25:U26"), Unique:=False
End Sub

It works great if I do anything on Sheet3. No problems. Thank you!

At first I had code on Sheet1:

Private Sub Worksheet_Change(ByVal Target As Range)
Sheets("Sheet3").AutoFilter.ApplyFilter
End Sub

Which resulted in the error "Runtime error 91, Object Variable or With Block not Set".

I changed the code based on comments to be:

Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
Sheets("Sheet3").AutoFilter.ApplyFilter
End Sub

Now I don't get an error, but the data on Sheet3 and therefore Sheet1 don't change. In other words, the event of applying the filter to Sheet3 doesn't occur when I make a change on Sheet1. It doesn't matter if I hit <return> or click on another cell after changing the Sheet3 filter criteria cell that is set on Sheet1.

As an aside, I expect that if I wanted to have multiple cells on Sheet1 that caused filters on Sheets 4 and 5 in addition to Sheet3, I would need the code on Sheet 1 to read:

Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
Sheets("Sheet3").AutoFilter.ApplyFilter
Sheets("Sheet4").AutoFilter.ApplyFilter
Sheets("Sheet5").AutoFilter.ApplyFilter
End Sub

Thanks again!
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations